background image

 12 

CHAP. 7 - MAINTENANCE 

7.1 - GENERALITIES 

Before carrying out any maintenance operation: 
a)

disconnect the plug from the socket in order to isolate the machine completely from
the rest of the plant.

 

7.2 - FEET 

With time, the feet could deteriorate and lose elasticity, thus reducing machine stability. 
Replace them. 

7.3 – POWER SUPPLY CABLE 

Periodically check the state of wear of the cable and, if necessary, contact the “AFTER-SALES 
CENTRE” for its replacement. 

7.4 - CUTTERS 

Check that after many sharpening operations, the blade does not reduce more than 5 mm. Call 
the “AFTER-SALES CENTRE” to replace them. 

CHAP. 8 - DISMANTLING   

8.1 – PUTTING OUT OF SERVICE 

If for any reason, the machine is to be put out of service, make sure that it cannot be used by 
anyone: 

disconnect and cut the electrical connections. 

8.2 - WEEE Waste Electrical and Electronic Equipment  

For the purpose and effects of art.13 of Italian Legislative Decree n.151 dated 25 July 2005, 
”Implementation of the 2002/95/CE, 2002/96/CE and 2003/108/CE Directives, relative to the 
reduction of use of dangerous substances in electrical and electronic equipment, as well as 
waste disposal”.   
The crossed bin symbol on the appliance or on its packaging indicates that this product must 
be collected separately from other waste at the end of its life. 
The separate collection of this equipment at the end of life is organized and managed by the 
manufacturer.

 

The user who wishes to dispose of this equipment should contact the 

manufacturer and follow the system that the same uses to allow for the separate collection of at 
end of the equipment’s life. 
The adequate separate collection for the subsequent start-up of the equipment sent to be 
recycled, treated and disposal of in an environmentally compatible way contributes to 
preventing possible negative effects on the environment and health and optimises the recycling 
and reuse of components making up the apparatus. Abusive disposal of the product by the user 
involves application of the administrative sanctions according to the laws in force. 
Improper disposal of the product by the owner involves the application of administrative 
sanctions envisioned by the law.  

Summary of Contents for Blitz









Reviews: