DEFROSTING
7
We recommend defrosting the freezer every three month or if the layer of ice exceeds 5 mm.
Do never use metal or other sharp objects to scrape the internal sides as it can damage the freezer
1.
Disconnect the freezer
2.
Empty the freezer
3.
Leave the freezer with the lid open
4.
Use the plastic scraper to remove the ice from the inner liner
5.
Remove the drain plug and open the drain on the back side of the freezer and place a tray
under the drain
6.
Clean the freezer with mild detergent and wipe thoroughly
7.
Connect the freezer and it is ready for use.
LOCK
The freezer is supplied with a lock in the handle
CLEANING AND MAINTENANCE
Switch off the electrical connection at the socket.
The cabinet must be periodically cleaned. Clean the external and internal surfaces of the cabinet with
a light soap solution and subsequently wipe dry.
Do not spray the appliance with direct jets of water or using high pressure appliances.
Do NOT use cleansers containing chlorine or other harsh cleansers, as these can damage the
surfaces and the internal cooling system.
Clean the condenser and the compressor compartment using a vacuum cleaner and a stiff brush.
SERVICE
The cooling system is a hermetically sealed system and does not require supervision, only cleaning.
If the cabinet fails to cool, check if the reason is a power cut.
If you cannot locate the reason to the failure of the cabinet, please contact your supplier. Please
inform model and serial number of the cabinet. You can find this information on the rating label which
is placed inside the cabinet in the top right hand side.
