background image

3

©2008 Diamond Audio Technologies. All rights reserved.

Thermal-Dyne eXtreme

 is a fundamentally different solution.  The concept is simple, eliminate the 

detrimental effects of heat in a loudspeaker system. The solution however, is quite complex.  Our 
engineers decided to start with a fresh sheet of paper and build a new line of products that addressed 
the thermal problems and shortcomings of conventional designs while significantly raising the existing 
level of performance. 
 
To understand TDX

 speaker technology, it must first be compared to that of a conventional speaker 

design.  At the heart of every speaker is a permanent magnet motor structure that provides the 
magnetic energy, or force to move the voice coil back and forth within the magnetic air gap.  Conven-
tional speakers use a large ceramic magnet surrounding the voice coil that actually retains heat rather 
than dissipating it.  TDX

 motors use a small but very efficient high temperature Neodymium magnet 

mounted inside the voice coil.  The geometry, venting and material selection for the motors have all 
been optimized for ideal thermal dissipation.  The TDX™ thermal efficiency is nearly (5) times greater 
than conventional designs. In conjunction with the motor design, TDX™ Technology utilizes die-cast 
aluminum frame structures to act as a heat sink for the encapsulated motor structure.  To insure 
maximum heat transfer from the encapsulated motor case to the aluminum frame, a special thermal 
paste fills any surface voids that may be present in this mating surface.

The evolution of TDX

 Technology can be seen in the new HEX

 Pro series of products. The new HEX

 

Pro component systems take this TDX

 Technology and expand on it to maximize the benefit for 

superior full spectrum audio performance.   To faithfully reproduce an extended frequency range, the 
materials and design must be optimal.  This coupled with a demand for very high power handling, is 
extremely challenging.  These systems utilize an improved version of our legendary HEX

 cone, our 

patented dual-tuned chamber tweeter along with our extruded aluminum, high power, programmable 
crossover to make the very best speaker system available in mobile audio. Period.

TDX™ TECHNOLOGY

Summary of Contents for HP10









Reviews: