6
©2008 Diamond Audio Technologies. All rights reserved.
HP122 TECHNICAL DATA
HP122
82.4
4
3.98
5.532
0.495
0.454
24.964
36.178
49.0
21.984
19
800/1600
Parameter (unit)
SPL (dB)
Z ( ) {series}
Re ( ) {series}
Qms
Qes
Qts
Fs (Hz)
Vas (L)
Sd (mm
2
)
BL (T*M)
Xmax (mm)
Pwr (W)
NOM/MAX
HP122 ENCLOSURES
The enclosures specified below are offered as suggestions only. Assistance from an authorized
Diamond Audio retailer is recommended for designing the correct system for your vehicle. All
volumes below are shown as gross internal volumes, driver and vent displacement has been
accounted for. The use of a 30 Hz. sub-sonic filter is recommended on most vented enclosures.
Sealed
Vb (ft
3
)
F3 (Hz)
Qtc
Pe (W)
Optimum
1.0
47
0.689
1200
Vented
Vb (ft
3
)
Fb / F3 (Hz)
Port/s (in.)
{dia. x length}
Pe (W)
All Around
1.75
35 / 29
4 x 16
1000
Large
2.0
48
0.59
800
T/S PARAMETERS
HP152 TECHNICAL DATA
HP152
84.495
6.403
3.94
9.418
0.517
0.49
22.239
86.040
81.90
24.564
20.5
1000/2000
Parameter (unit)
SPL (dB)
Z ( ) {series}
Re ( ) {series}
Qms
Qes
Qts
Fs (Hz)
Vas (L)
Sd (mm
2
)
BL (T*M)
Xmax (mm)
Pwr (W)
NOM/MAX
HP152 ENCLOSURES
The enclosures specified below are offered as suggestions only. Assistance from an authorized
Diamond Audio retailer is recommended for designing the correct system for your vehicle. All
volumes below are shown as gross internal volumes, driver and vent displacement has been
accounted for. The use of a 30 Hz. sub-sonic filter is recommended on most vented enclosures.
Sealed
Vb (ft
3
)
F3 (Hz)
Qtc
Pe (W)
High Output
1.65
44
0.747
1500
Vented
Vb (ft
3
)
Fb / F3 (Hz)
Port/s (in.)
{dia. x length}
Pe (W)
All Around
2.5
36 / 32
(2) 4 x 25
1500
High Fidelity
2.0
44
0.703
1500
T/S PARAMETERS
Dimension (inches)
Total Diameter (A)
Mounting Diameter (B)
Screw Hole Diameter (C)
Mounting Depth (D)
Magnet Diameter (E)
Displacement (ft
3
)
HP122
12.4
11.1
11.7
8
6.5
0.15
DIMENSIONS
Dimension (inches)
Total Diameter (A)
Mounting Diameter (B)
Screw Hole Diameter (C)
Mounting Depth (D)
Magnet Diameter (E)
Displacement (ft
3
)
HP152
15.6
14.2
14.8
9.5
7.2
0.22
DIMENSIONS
HP102 TECHNICAL DATA
HP102
79.71
4
3.96
5.822
0.585
0.532
26.109
19.988
33.2
17.971
17
600/1200
Parameter (unit)
SPL (dB)
Z ( ) {series}
Re ( ) {series}
Qms
Qes
Qts
Fs (Hz)
Vas (L)
Sd (mm
2
)
BL (T*M)
Xmax (mm)
Pwr (W)
NOM/MAX
Dimension (inches)
Total Diameter (A)
Mounting Diameter (B)
Screw Hole Diameter (C)
Mounting Depth (D)
Magnet Diameter (E)
Displacement (ft
3
)
HP102
10.7
9.4
9.98
7.5
5.8
0.11
HP102 ENCLOSURES
The enclosures specified below are offered as suggestions only. Assistance from an authorized
Diamond Audio retailer is recommended for designing the correct system for your vehicle. All
volumes below are shown as gross internal volumes, driver and vent displacement has been
accounted for. The use of a 30 Hz. sub-sonic filter is recommended on most vented enclosures.
Sealed
Vb (ft
3
)
F3 (Hz)
Qtc
Pe (W)
Optimum
0.6
51
0.705
1000
Vented
Vb (ft
3
)
Fb / F3 (Hz)
Port/s (in.)
{dia. x length}
Pe (W)
All Around
1.25
42 / 33
4 x 16.25
800
Large
1.25
52
0.592
600
T/S PARAMETERS
DIMENSIONS
(A)
(B)
(C)
(D)
(E)
(A)
(B)
(C)
(D)
(E)
FEATURES
HEX™ PRO BASS DRIVER ASSEMBLY
TDX Technology™ (Thermal Dyne eXtreme)™
Proprietary Composite Hex Cone Technology
Nitrile Butadine Rubber (NBR) Surrounds
Die-cast Aluminum Frames
Dual Progressive Poly-Aramid Composite Fiber Spiders
Integrated Radial Venting
Aluminum Dust Cap
Ultra-high Energy Neodymium Magnet Structure
Vented Pole Piece
Huge 3" (HP10), 3 ½" (HP12), and 4" (HP15) Voice Coils
Dual 2 ohm Voice Coils
A FOREWORD ABOUT HEX PRO SUBWOOFERS
(A)
(C)
(E)
(B)
(B)
T
hermal-
D
yne e
X
treme
™
, a fundamentally different solution. The design concept of TDX
™
subwoofer technology was to start with a fresh sheet of paper and build a new product that
addressed all of the problems and shortcomings of conventional subwoofer designs while
significantly raising the existing level of performance. In today's market, a subwoofer should be
optimized for use in a relatively compact enclosure, should handle extreme levels of power, and
displace (or move) a large volume of air without any audible distortion. Conventional subwoofers,
with their dated materials and motor structures compromise several of these requirements.
The "fundamentally different" TDX
™
subwoofer technology meets all these requirements in
unequaled, elegant fashion. We say fundamentally different because the heart, the motor
structure, of this incredible device is unlike any existing motor today. Because of its superior
design, many of the problems that plague existing conventional subwoofers are eliminated.
To understand TDX
™
speaker technology, it must first be compared to that of a conventional
speaker design. At the heart of every speaker is a permanent magnet motor structure that
provides the magnetic energy, or force to move the voice coil back and forth within the magnetic
air gap. Conventional speakers use a large ceramic magnet surrounding the voice coil that
actually retains heat rather than dissipating it. TDX
™
motors use a small but very efficient high
temperature Neodymium magnet mounted inside the voice coil. The geometry, venting and
material selection for the motors have all been optimized for ideal thermal dissipation. The TDX
™
thermal efficiency is nearly (5) times greater than conventional designs. In conjunction with the
motor design, TDX
™
Technology utilizes die-cast aluminum frame structures to act as a heat sink
for the encapsulated motor structure. To insure maximum heat transfer from the encapsulated
motor case to the aluminum frame, a special thermal paste fills any surface voids that may
present in this mating surface.
In addition to this superior motor structure, the HEX
™
PRO subwoofer incorporates a dual
mirrored spider and NBR surround suspension system, and our patented HEX
™
cone technology.
The result is the most dynamic performing sub woofer in mobile electronics reaching the design
goal of audiophile sound quality performance, SPL capabilities, and continuing the Diamond Audio
tradition of providing the finest products available.
TDX
™
TECHNOLOGY
Product Owners Manual
SUBWOOFER
Dear Valued Customer,
All of us at Diamond Audio would like to thank you for your purchase of a HEX Pro speaker system. HEX
Pro component systems and subwoofers are the very best speakers available for use in the automobile
environment. By choosing thses products you recognize the value in using only the best. With our
proprietary HEX
™
cones and neo motors that utilize our patented TDX
™
technology, we know you will be
satisfied with these systems for years to come.
Please keep in mind that prolonged exposure to sound pressure levels in excess of 100 dB can cause
permanent hearing loss. This high performance speaker system can exceed that level, so please
exercise restraint in its operation in order to preserve your ability to enjoy its fidelity in the future.
Because of their flexible installation possibilities, please consider having your new speakers
professionally installed by an authorized Diamond Audio dealer. This will assure a clean and efficient
installation, and extend your one year warranty to three years.
At Diamond Audio Technologies, we strive to bring honest value and excellent quality to all of the
products we build. By your purchase of this product, you have joined the growing family of discerning
listeners who demand only the best. Welcome!
The Diamond Audio Team
WARRANTY
Diamond Audio Technologies
6915 W. Frye Road
Chandler, Arizona 85226 USA
PHONE:
(480) 820-2075
FAX:
(480) 813-6210
SERVICE/TECH SUPPORT:
480-820-2075
TECH SUPPORT EMAIL:
tech@diamondaudio.com
WEB:
www.diamondaudio.com
Diamond Audio warrants this product to be free from defects in material and workmanship under normal use
for a period of one (1) year from date of original purchase. Should service be necessary under this warranty
for any reason due to manufacturing defect or malfunction during the warranty period, Diamond Audio will
replace or repair (at our discretion) the defective merchandise at no charge.
This warranty is valid only to the original purchaser and is not extended to owners of the product subsequent
to the original purchaser. Any applicable implied warranties are limited in duration to a period of the express
warranty as provided herein beginning with the date of the original purchase at retail, and no warranties,
whether expressed or implied, shall apply to this product there after. Some states do not allow limitations on
implied warranties; therefore these exclusions may not apply to you.
This warranty gives you specific legal rights; however you may have other rights that vary from state to state.
If your Diamond Audio speakers need service, defective merchandise must be returned to your local
Authorized Diamond Audio dealer for warranty. Return only the defective component. Non-defective items
received will be returned freight collect. Freight damage and return shipping is not covered under warranty.
Include proof-of-purchase with the returned items. Warranty expiration on items returned without
proof-of-purchase will be determined from the manufacturing date code. You can confirm that a dealer is
authorized for service by the display of a current authorized dealer window decal. Any questions can be
directed to the Warranty Department at (480) 820-2075. This warranty is valid only if the product is used for
the purpose for which it was designed. It does not cover:
s4HECOSTOFSHIPPINGTHISPRODUCTTO$IAMOND!UDIOS3ERVICE$EPARTMENT
s$AMAGETHROUGHNEGLIGENCEMISUSEABUSEORACCIDENT
s$AMAGECAUSEDBYEXPOSURETOWATERANDOREXCESSIVEHEAT
s)TEMSRIPPEDTORNORPHYSICALLYDAMAGEDDUETOABUSE
s3PEAKERSWITHSILICONEORCAULKUSEDFORGASKETMATERIAL
s2ETURNSHIPPINGIFDEFECTIVEDRIVERSARERETURNEDWITHANYKINDOFENCLOSURE
s)TEMSRETURNEDFROMUNAUTHORIZEDINDIVIDUALSORDEALERS
s)TEMSPREVIOUSLYREPAIREDBYANYUNAUTHORIZEDREPAIRFACILITY
International customers: please contact your International Diamond Audio dealer or distributor concerning
SPECIFICPROCEDURESFORYOURCOUNTRYSWARRANTYPOLICIES)FYOUARENOTABLETOLOCATEYOURLOCALDISTRIBUTORPLEASE
contact Diamond Audio at (480) 820-2075 for assistance in contacting the distributor servicing your country.
PHYSICAL DIMENSIONS
Dimension (Inches)
HP10
HP12
HP15
Total Diameter (A)
10.7” (272mm)
12.4” (315mm)
15.6” (396mm)
Mounting Diameter (B)
9.4” (239mm)
11.1” (282mm)
14.2” (360mm)
Screw Hole Diameter (C)
9.98” (254mm)
11.7” (297mm)
14.8” (376mm)
Mounting Depth (D)
7.5” (191mm)
8” (203mm)
9.5” (241mm)
Magnet Diameter (E)
5.8” (147mm)
6.5” (165mm)
7.2” (183mm)
Displacement
0.11 ft
3
(3.11 liter)
0.15 ft
3
(4.24 liter)
0.22 ft
3
(6.23 liter)
