background image

13

6 0 0  S E R I E S  T R E A D M I L L   O W N E R’ S  M A N U A L

Programs

SPEED PROGRAMS

-  Speed Interval Program (P1); Weight Loss Program (P2))

Beginning the Program

Press “SELECT” key once  to enter the program mode.  At this
time,  the  CAL./PULSE  window  will  show  “P1”  and  the  speed
window will show top speed of “6.0”.

Press    +    -    key  to  select  the  desired  program,  P1  for  Speed
Interval Program and P2 for Weight Loss Program.  Please see
attached speed charts for program details.

User may adjust the program’s top speed setting, the default top
speed is 6.0 MPH.  Press UP/DOWN Arrow (

▲▼

) key under the

speed window, to adjust the program’s top speed, up to 10 MPH.

Press “START” key to accept the setting and begin the program.

The console will start a 3 second count down.

Begin workout.

Program Time

The Time window will display the workout time

The default time of this program is 30 minutes and is divided into
15 stages, 2 minutes for each stage.

During Workout, user may

Adjust Elevation

The Elevation window is displaying the default elevation: 0%.

Press UP/DOWN Arrow (

▲▼

) key, under the elevation window,

to adjust elevation, up to 10%.

Stop or Reset the Program

To Stop this program, press “STOP” key once. The console will
Stop the program. At this time, all the data window will show the
end of workout information, the Speed will return to 0 MPH and
Elevation will return to 0%.

To Reset this program, press “STOP” key after the program stops.
The console will reset to “idle mode” and be ready for entering
any new program.

Program Notes

This program will Stop after 30 minutes. The console will reset to
“idle mode”. The Speed will return to 0 MPH and Elevation will
return to 0%. User may select any program at this time.

Program may be interrupted by disengaging the safety cord from
the  console.  At  this  time,  the  TIME  window  will  display  “E

RR

and  the  CAL/PULSE  window  will  display  “03”.  The  Speed  will
return to 0 MPH and Elevation will remain at the previous setting.
To re-start  this  treadmill,  simply  place the safety  cord back  on
the console.

Summary of Contents for 650T
























Reviews: