Diamondback 950Ef, Owner'S Manual

20

950 E

f

Owner’s Manual

Workout Programs (continued)

The level of the remaining Rest segments will be updated to the new setting 
and the dot matrix window will update the intensity profile accordingly as 
well.

•

Press “Level Up/Down” key during Work segment to adjust the level from L10.
The level of the remaining Work segments will be updated to the new setting 
and the dot matrix window will update the intensity profile accordingly as 
well.

Ending the Program

•

When selected program time is up or Stop key is pressed, this program will 
end and Cool down will be active. See Cool down section for details.

•

There will be a beep sound to indicate the program ends.

Pause, Reset, Re-start or Switch a program

See Console Operating Tips section for details, pages: 9 & 10. 

H I L L

Getting Started

The Hill program simulates a hill climb exercise with a preset hill profile. The exercise
profile will guide you through the up hill climb or down hill glide.  

Beginning the Program

During idle mode, the dot matrix window displays ”DB”. To begin this program, press
“Classic Programs” key until “Hill” program LED indicator lights up. 

Accepting default values or Entering the program setup mode

When the dot matrix display shows Hill program profile, it indicates you are about to
select the Hill program:  

•

Press “Start” key to accept current default values and begin Hill program 
workout.
–

Default Time = 30 minutes

–

Default Level = a preset level profile with default difficulty level = L1.

•

Or press “Enter” to enter program setup mode The dot matrix & data displays
will take you through the program setup mode step by step as below: (same 
as Manual program setup)
–

Entering Age

–

Entering Weight

–

Entering Time

During the Program

As soon as the “Enter” or “Start” key is pressed, the Warm Up will be active. See Warm
Up mode section for details.

Data Display
•

When Warm Up mode is completed, the data display window will display the
default workout data of “calories, speed & level”. Press “Select” button to 
switch the data displays to “watts, distance & RPM”.

•

Time display will show the selected program time and count down.

•

Pulse display will start displaying if there is a valid pulse.