|
619-905-9400
7
1
Unplug the power cord
from the electrical outlet.
2
Disconnect the 5-gal.
quick disconnects.
3
Disconnect upper drain union
turning clockwise.
4
Twist counter-clockwise to remove
bucket and lid
(
keep track of clear
plastic gasket
)
. Pour off water
and remove waste clay.
5
Refill the 5-gal. bucket with
fresh water to the fill line.
6
Reattach the lid. Make sure it is
seated properly and tight
(
be
careful not to overtighten
)
. Slide
the bucket under the sink and
align the drainpipe. You may need
to push down on the bucket lid
so the drainpipe will fit.
7
Turn the upper drain union counter-
clockwise to tighten. Be sure
clear plastic gasket is in place.
8
Reconnect the quick disconnect linking the
5-gal. bucket to the center of the 6.5-gal. bucket.
MAINTENANCE
MAINTENANCE
To maintain The CINK, you will need to empty the 5-gallon clay collection bucket, clean the filter bag and replace the
string filter cartridge periodically. You may also need to winterize or prepare The CINK for periods of unuse. Remem-
ber, as you perform these maintenance steps, small amounts of water may leak out from the system.
Emptying the 5-Gallon Clay Collection Bucket
The 5-gallon bucket is intended to capture most of the clay and slip that will be put into The CINK. You will need to
empty this bucket more frequently than cleaning or replacing the other two filters.
To empty the 5-gallon bucket when it has collected a significant amount of clay:
Summary of Contents for CINK
Page 1: ...The CINK User Manual...
