DiamondCore Tools CINK, User Manual

|

   619-905-9400

9

1

Unplug GFCI power cord.

Push down on the red button  

to release vacuum.

Turn blue filter housing  

clockwise to remove. Caution:  

Filter housing is full of water.

4

Remove and clean string  

filter and housing. Do not  

misplace the black O-ring. 

5

Remove black O-ring

and wipe  

the groove clean. Place the  

O-ring

back into the groove. If it 

appears damaged or crimped,

it should be replaced. 

6

  Reinsert clean or new string filter, 

making sure that it slips down  

over the standpipe inside on the 

bottom of the blue housing. Refill 

with water to top of housing. 

7

Reconnect the blue filter housing, 

making sure that the string filter  

slips over the upper standpipe.  

Twist the blue filter housing counter- 

clockwise and hand-tighten.  

DO NOT OVERTIGHTEN.

8

Make sure the valve handle  

is OFF and the faucet nozzle is  

aimed into the basin. Plug the  

power cord back in.

2

3

MAINTENANCE

Changing the Filter Cartridge in the Big Blue Filter

The big blue filter collects ultra-fine clay particles and should be cleaned at least every 3 months. Eventually, the 
pores of the filter cartridge will fill up  and the water flow from the spray nozzle will decrease. At that time, please visit  
www.DiamondCoreTools.com, call 619-905-9400 or email info

@

diamondcoretools.com to purchase replacement filters.

To change the filter cartridge: