background image

DL-60BSH

MODEL

Bluetooth

FM Radio

Speaker

Color Temp.(K)

CRI

Brightness

USB Port

Life Time

Power

Power Consumption

Dimension

Weight

Operating Temp.

DL-60BSH

Version : V 2.1 + EDR  /  Profile : A2DP, HFP, SPP  /  Frequency : 2,400 ~ 2,483MHz  /  Power class2

87.5MHz ~ 108MHz(USA, Europe) / 76MHz ~ 108MHz(Japan)

L 1W(MAX.) + R 1W(MAX.) / Rotary Volume Control / Headphone(

¤“

3.5 Stereo Jack) 5mW(MAX.)

Study mode : 6,000K~7,000K  /  Reading mode : 4,300K~5,300K 

Relaxation mode : 2,500K~3,300K  /  Bedtime mode : 2,500~3,300K

Over 90

1,100 / 1,000 / 900 /750 / 600  Lux 

±

100Lux

DC 5V        700mA(Charging)

Longer than 40,000Hour

AC/DC adaptor : AC 100~240V,  DC 12V        2A

10W(LED), 6W(Charging) MAX. 18W

180mm(W:Base) 

×

172mm(D:Base) 

×

 455mm(H) 

×

 328mm(L)

1,390g

-10 ~ 40

DESK LAMP

Bluetooth & FM Radio

Bluetooth & FM Radio

Power Saving

10W

(LED)

CRI

90

 Over

USER MANUAL

Eye sight 

Protection

LED

40,000H 

Thank you for purchasing DL-60BSH(Bluetooth LED Desk Lamp).
Please read instructions with care and operate DL-60BSH safely before use.
We'd like to recommend you to keep instructions to use DL-60BSH well.

This product is CE marked according to the provision of the R&TTE Directive (99/5/EC).Here by Diasonic Technology Co., Ltd.
declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.

● 

Caution :

 Any changes or modifications in construction of this device which are not expressly approved by the 

                   party responsible for compliance could void the user's authority to operate the equipment.

● 

Note :

 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to 

                part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference 
                in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not 
                installed and used in accordance with the instructions, may cause harmful interference to radio communications,
                However, there is no guarantee that interference will not occur in a particular installation. If this equipment does 
                cause harmful interference to radio or television reception, which can be determined by turning the equipment 
                off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
               - Reorient or relocate the receiving antenna.
               - Increase the separation between the equipment and receiver.
               - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
               - Consult the dealer or an experienced radio / TV technician for help.

Caution

Do not repair, disassemble, 

or modify under any 

circumstances.

Do not place near any heat 

sources or in direct sunlight.

Place on flat, secure surface.

Use ONLY the supplied 

AC power adaptor.

Do not use appliances with 

frayed or damaged electrical 

cords.

Do not touch electrical 

appliances with wet hands 

or when liquids are present.

Please keep the light and all 

appliances dry and clean.

Unplug adapter when the
light will not be used for an 
extended time.

Clean only with a soft dry 

cloth and do not use solvents 

or cleaning solutions.

Never overload electrical 

circuits as it may cause 

electrical shock or fire.

ONLY

 

Supplied Adaptor 

Specification

 

Product : LED Desk Lamp

 

Model : DL-60BSH

 

Warranty Period : 1year

 

Purchase Date:   

Purchaser

Seller

Name

Address

Telephone

Name

Address

Telephone

 

For Repair or Service 

     If the product stops working correctly, discontinue its use and contact to the service center where you purchased.

 

Repair Policy

     1. This product has passed strict quality control and testing process.
     2. Failure of the product under normal operating conditions, during the warranty period may be repaired by Diasonic or our authorized service
         organization free of charge. 
         Some shipping or handling charges may be involved.
     3. For the following cases, some service fees will be charged.
         1) When the product is damaged due to user's mishandling, abuse, or improper operation.
         2) When the product is damaged due to user's modification, attempted repair, or otherwise access to sealed/non-user serviceable items.
         3) When the product is damaged due to fires, pollution, earthquakes and any other natural or unnatural conditions, accidents, etc. 
     4. It will be at the sole discretion of the authorized service center to determine the qualification of the warranty service.  
         Original purchase invoice and other documentation may be required to verify qualification of service.

Warranty Card

Ver.2

FCC 

(Federal Communications Commission)

EU

Reviews: