①
Stand-by mode after press Bluetooth button( ) during 3 seconds.
②
Red LED of Call button( ) and Bluetooth button( ) will be blinked 2 times periodically during Stand-by mode for pairing.User
can search device by Bluetooth device or mobile phone at that time. Find out DL60BSH in searching list of Bluetooth device or mobile phone.
③
Press 0000 PIN code for mobile phone's request.(PIN code won't not requested by some mobile phones)
④
Red LED of Bluetooth button will be stopped blinking after succeed pairing.
※
If press FM button( ) during stand-by Bluetooth, the Radio will be ON and Bluetooth button's( ) RED LED will be turned off.
※
During listening to the Radio, the Radio will be OFF if you get a phone call or pairing some Bluetooth device to the lamp.
※
During pairing mode to listen to music, music playing will be stopped if turn on the FM Radio.
.
Call
: Call by mobile phone, RED Led of Call button( ) will be turned ON if lamp got pairing with mobile phone.
.
Receive call
: If lamp got pairing with mobile phone, ring at a time by mobile phone and lamp. Red LED of call button( ) will be turned
on and take a phone call by press call button( ) shortly as 0.5 sec.
.
Hang-up
: After finishing phone call, press the call button( ) for more than 1.5 seconds.
.
Rejects call
: For reject call, press call button( ) during 1.5 second.
.
Transfer call
: Press the call button( ) in less than 0.5 seconds during call, it could be transferred lamp mode or mobile phone mode
conversation.(Press the call button again in less than 0.5 seconds, it will be transferred again)
※
Music playing will be stopped temporary while user takes a phone call.
▶
Brightness Control Function.( )
5Steps
Brightness Control Function.
▶
Timer Control Function.( )
Automatically turns off the light off in one hour(1hr) while
in any mode of operation.
▶
Bluetooth On/Off.
Pairing Bluetooth device to Lamp and then press Bluetooth
button( ) shortly then Bluetooth mode will be OFF and
RED LED will be turned off as well. If press it again shortly,
Bluetooth mode will be ON and RED LED will be turned on.
.
Turn on the Radio by press button FM( ). Choose your Frequency by SCAN button ( ). The frequency range is from 87.5 to
108Mhz and search it by 100Khz step.
.
Press
PRESET
button and then LED will be turned ON. Press Left-Right key of SCAN button ( ), then you can find and listen to the
Radio by your fixed-set frequency.
.
Turn on the radio by press FM button( ). FM button( ) will be blinked by Red color if press left or right key of
SCAN
button
during 1.5sec Also, search frequency and set it automatically. (Maximum 20 channels available)
.
Add frequency and delete
: Press
PRESET
button during 1.5 sec after cleared
PRESET
mode, User can add present frequency.
On PRESET mode, if press
PRESET
button during 1.5sec, delete frequency and then move set frequency.(Red LED of
PRESET
button
will be turned OFF after deleted all of set frequency)
.
Red Led of Preset button will be ON after searching and setting then move to first set frequency. (If there is no searching set frequency
cause of bad reception, it will keep previous set frequency) Press
PRESET
button again, LED will be turned off and cleared Preset mode.
130
°
USB Port
Touch type control button
USB Port & Power Jack
Mic.
Headphone Jack
Power Jack
Unit : Lux,
±
100Lux
(Measuring standard : 40cm space from emitting area.)
Preset(FM)
Reading Mode
Telephone mode
Bluetooth
Study Mode
FM Radio
Search FM
Frequency
※
Bluetooth button( ) and Red LED of Call button( ) will be turned off if pairing is failed in 2 min.
※
Bluetooth device could be connected to lamp in a close range if device is succeeded pairing already.(Two devices should be Bluetooth ON status)
A
D
C
B
E
※
The red LED of the FM button( ) flickers on and off once when addition or delete of PRESET work normally while the red LED of
the FM button( ) flickers on and off twice when it failed to add due to an excess of the number of set-up that the maximum is 20.
90
°
50
°
90
°
Control Button
Volume Knob
Volume Control
LED Light
Brightness
Control
Relaxation Mode
Bedtime Mode
Power
On/OFF
Timer
▶
One Touch Control Function.
Convenient to control functions of ON/OFF on various
situations by simple touch method.
▶
Listen to the FM Radio
▶
Set PRESET
▶
Call / Receive Call / Hang-Up / Reject Call / Call Transfer
▶
USB Port(Charging)
▶
Operational Modes.
Study Mode (6,000~7,000K)
Increases attention and concentration with the choice
of high-range color temperature.
Reading Mode (4,300~5,300K)
It stimulates concentration and reduces eye strain
with the choice of mid-range color temperature.
Bedtime Mode (2,500~3,300K)
Encourages a deep sleep with the comfortable soft light.
Relaxation Mode (2,500~3,300K)
Promotes relaxation along with improved mood with
the choice of low-range color temperature.
▶
Pairing with mobile phone or other Bluetooth devices.
.
Pairing Bluetooth between DL-60BSH and Bluetooth devices.
.
DL-60BSH will catch other Bluetooth devices in a close range after first pairing is succeeded.
▶
Bluetooth ON/OFF
.
Press Bluetooth button( ), Red LED of Bluetooth button( ) will be ON during connecting to mobile phone or Bluetooth devices
and Red LED of Bluetooth button( ) will be ON after connected.
.
Play mode will be stopped if press Bluetooth button( ) during playing music by Bluetooth pairing mode.
.
Bluetooth connection will be disconnected if press Bluetooth button( ) during 3 sec.
▶
Ready for Bluetooth
User can listen to music or take a phone call by Bluetooth pairing with external Bluetooth devices or Bluetooth mobile phone. First,
user should check device which has Bluetooth function.
▶
Steps of pairing
.
Bluetooth version
: V2.1 + EDR /
Profile
: A2DP,HFP,SPP /
Frequency
: 2400~2483Mhz /
Wireless output
: Power class2
.
Possible to recharge various digital devices such as MP3 & Mobile phone through USB port supplying 5V(700mA) power.
Features and how to operate
How to use Bluetooth
Intensity of illumination by mode
Setting and operation
Product Box Contains
Multi-Pivot Flexible Positioning
Step
Step 1
500
600
300
50
Step 2
650
750
350
100
Step 3
800
900
400
150
Step 4
900
1000
450
200
Step 5
1000
1100
500
250
Reading mode
Study mode
Relaxation mode
Bedtime mode
1.Do not place at slanting place.
2.Adjust height appropriately.
3.Please put a plug into the socket
after connect AC adaptor to the
back side of the body.
4.Press the power button.
A
. Light Stand including light
B
. Control Button
C
. Light Base
D
. AC Adaptor(Length 180cm)
E
. Set Holder
