background image

IMPORTANT SAFETY INSTRUCTIONS 

READ BEFORE USING

TABLE OF CONTENTS

KEEP THESE INSTRUCTIONS 

IN A SAFE PLACE

•  ONLY use the meter for the purposes set 

  out in this manual.

•  Do not use ANY accessories not specified 

  by the manufacturer.

• Do NOT use the meter if it is 

  malfunctioning or damaged.

•  This meter is not designed to cure given 

  symptoms or diseases. The measured 

  data serve solely as reference values. 

  Always consult your diabetes physician 

  and/or GP for the proper interpretation of 

  the results you have measured.

•  Read all the instructions carefully and 

  practice the procedure a number of times 

  before actually testing your blood sugar 

  and/or ketone levels. Perform all quality 

  checks in accordance with the instructions.

•  Keep the meter and all its parts out of 

  reach of young children. Small parts, such 

  as the battery cover, the batteries, test 

  strips, lancets and caps are a potential 

  choking hazard.

•  Use the meter in a dry environment, 

  especially if synthetic materials are 

  present (such as synthetic clothing or 

  carpeting), which can cause a static charge 

  that could mean incorrect results. 

BEFORE YOU START

 ...................................

7

Important information ................................ 7

Meter overview ........................................... 8

Display......................................................... 9

Test strip ...................................................... 9

SETTING UP THE METER

 ..........................

10

SETUP MODE

 ............................................

11

For blood sugar testing .............................11

For 

β

-ketone testing ..................................11

QUALITY CONTROL TEST

 ..........................

11

When should you test the device using 

control solution? .......................................11 

Performing a test with the control solution ..11

TESTING USING BLOOD SAMPLES

 .........

12

Preparing the lancing device for a blood test ..12

Preparing the puncture point ...................12

Performing a blood sugar test ..................13

METER MEMORY

 .....................................

14

Viewing the test results .............................14

Viewing the average of blood sugar results 

over a number of days ..............................15

DOWNLOADING YOUR RESULTS  

TO A COMPUTER

 ......................................15

CONNECTING THE METER TO  

A SMARTPHONE

 ......................................

16

Maintenance .............................................17

Battery .......................................................17

Replacing the batteries .............................17

Caring for your meter ................................18

Caring for your test strips ..........................19

Important information on the  

control solution .........................................19

READING THE RESULTS

  ..........................

20

For blood sugar tests .................................20

For 

β

-ketone tests ......................................20 

• Do NOT use the meter near sources of 

  strong electromagnetic currents, as the 

  accuracy of the measurement could be 

 affected.

•  Proper maintenance is essential to 

  the operating life of your meter. If you 

  are worried about the accuracy of your 

  measurements, contact customer support 

  or your distributor for support.

REFERENCE VALUES

 ................................

21

For blood sugar tests .................................21

For 

β

-ketone tests ......................................21

TROUBLESHOOTING SYSTEM ISSUES

 ....

22

Error messages ..........................................22

Troubleshooting ........................................23

INFORMATION ON SYMBOLS

 .................

24

SPECIFICATIONS

 ......................................

25

4

5

Summary of Contents for XPER TD-4289B
















Reviews: