Meter overview
Display
Test strip slot and strip indicator light
Insert your test strip, the section containing the contact points, into this slot
(so that it is firmly in place) in order to turn the meter on for your test.
Bluetooth® indicator light
(Bluetooth® can be optionally activated).
Ejecting the test strip
Eject the test strip by pushing this button upwards.
Mains button (M)
Open the memory of the meter and turn off the reminder.
Display
Data port
Download the test results to your computer using a USB cable.
SET button (S)
Input the selected meter settings and confirm them.
The SET button is located in the battery compartment.
Battery compartment
Test result
Measuring mode
Gen – at any time
AC – before meals
PC – after meals
Automatic quality
control mode
QC = Quality control test using
the control solution
Average over a number of days
Memory symbol
Date/Time
Error warning
Alarm symbol
Measurement unit
Ketone symbol
Absorbent opening
Test strip grip
PLEASE NOTE: The front of the test strip must be facing
upwards when you insert the test strip.
The test results could be incorrect and/or inaccurate if that part of the test strip containing the
contact points is not fully and correctly inserted into the test slot.
Control window
Contact points
Low battery warning
Test strip symbol
Blood drop symbol
Glucose (blood sugar) symbol
Code
1
2
3
4
5
6
7
8
1
2
11
12
13
14
15
3
4
3
4
5
6
7
8
9
10
NOTE:
Only Diatesse XPER test strips may be used with the Diatesse XPER meter.
Using other test strips with this device could produce inaccurate results.
8
9
1
2
Summary of Contents for XPER TD-4289B
Page 14: ...26 27 NOTES ...
