Centrifugal in-line electric fan
CYCLONE-EBM
Passport
Service instruction
EN
Assignment
Centrifugal in-line electric fan CYCLONE – EBM is intended for
application in rooms of residential and public buildings, and also in
auxiliary buildings of the industrial enterprises.
Technical characteristics
CYCLONE – EBM fan is issued six standard sizes depending on the install
housing diameter.
Notation:
CYCLONE-EBM 100
CYCLONE-EBM 125
CYCLONE-EBM 160
CYCLONE-EBM 200
CYCLONE-EBM 250
CYCLONE-EBM 315
Fan look, basic dimensions, connecting sizes and technical characteristics
described in pic.1 and lists of dimensions and characteristics.
C
30
30
ØD
ØD
ØB
Pictu
re
1
“ERA” fans are manufactured according to specs 4861-006-96059883-
2014, valid rules and standards. Fans are intended for alternate current
network connection of 220-240 V voltage and 50 Hz frequency.
Safety requirements
Base on type of protection from electric shock the fans relate to the class I
devices per GOST(all-union State Standard) 12.2.007.0-75. The level of fan
protection against dangerous parts and water is IP X4. The level of motor
protection against dangerous parts and water is IP 44.
Attention!
Fan operation outside the specified temperature range (from -25C
to +70C) is prohibited.
It is prohibited to install fan in the same air vent line together with
smoke emission pipe of the fuel burner devices.
Type
Dimensions, mm
D
B
C
CYCLONE-EBM 100
99
251
215
CYCLONE-EBM 125
124
251
220
CYCLONE-EBM 160
159
340
229
CYCLONE-EBM 200
199
339
250
CYCLONE-EBM 250
249
339
250
CYCLONE-EBM 315
314
405
284
Characteristics
100
125
160
200
250
315
Power consumption (W)
52
52
85
135
210
225
Fan efficiency (m
3
/hour)
265
370
680
900
1100
1700
Frequency of rotation, r.p.m.
2350
2350
2700
2650
2500
2700
Pressure, Pa
310
310
400
540
580
740
Noise amount (dB)
52
51
57
55
53
53
The set of delivery
• Assembled fan
• Passport/instruction
• Packing box
Maintenance
• switch off the fan;
• disconnect it from air ducts and air dispensers and remove from the
installation site;
• remove dust from blades of the driving wheel, using a soft dry brush
or cloth;
• clean blades of the driving wheel, using soapy water;
• wipe all plastic parts with a soft cloth dampened with soapy water;
• wipe all surfaces dry;
• assemble and install the fan in place;
• recommended to do the cleaning 1 time in 6 months.
Attention!
Do not allow the cleaning solution to the motor!
Storage and transportation
Keep the fan only in manufacturer packaging in a ventilated room with
temperature range from -40°C to +80 ° C and relative humidity of 80% (at T =
25 ° C). Shelf life - 5 years from manufacture date.
Products are to be transported by any transport, provided that manufacturer
packaging is safe from direct exposure to rainfall, impact from other products,
displacement during transportation. Transportation is conducted, according
to the rules applicable for this transport.
