Yog’s E-PIPE one powered by dicodes
15
Value Menu
The Extended Functions Menu contains another submenu with several statistical values. There
are two types of value counters that can either be reset to zero or not. The statistical counters
are saved when the mod is switched off automatically or manually. On the other hand, if the
battery is removed from the device before it is switched off, the changes in the counters since
the last time it was switched on will be lost. The following statistical values are stored:
Cycles
Number of puffs.
The counter can be reset to 0.
Time
The time period during which power was applied to the coil, i.e. the vaping time.
The counter can be reset to 0.
Energy
This is the energy consumption when vaping in joules=watt-seconds. This value is the actual
integrated vape power over time. It is the power integral, because in temperature controlled
vaping (and also in bypass mode) the power is not constant, but varies a lot over time due to
the regulation.
The counter can be reset to 0.
BatCap
Battery capacity (BatCap) is quite an interesting counter: if you reset it immediately after
inserting a fully charged battery and check it before inserting a new battery, it will show the
capacity of the battery. With this function, the user can check if the battery has the capacity
specified by the manufacturer or if the battery is worn out.
This counter can be reset to 0.
The menu item (ResetCntr) is intentionally placed between resettable and non-resettable
counters. This way it is easier to remember which ones can be reset.
TotCycl
The total number of cycles (TotCycl) is the number of puffs during the entire life of the device.
It
cannot
be reset.
TotTime
Total time (TotTime) is the time of active use (without standby) in the format HHHH:MM, which
consists of four digits for hours and two digits for minutes.
It
cannot
be reset.
