18
Walkabout™ 5210 User Guide
Voice Activation
If you activate the
Voice activ.
function, recording is interrupted
when you pause speaking and resumed when you begin speaking
again.
To use the voice activated feature:
1. Use the up/down button
to select the menu item
Voice
activ
.
2. Press the
OK
button.
3. Use the up/down button
to select
VA off
or
VA on
.
4. Press the
OK
button.
Microphone Sensitivity
If you switch the
Mic. sensitivity
function to
Conference
, the
microphone records at low voice levels, for example, when it is
placed on a conference table during a meeting.
To adjust microphone sensitivity:
1. Use the up/down button
to select the menu item
Mic.
sensitivity
.
2. Press the
OK
button.
3. Use the up/down button
to select
Dictation
or
Conference
.
4. Press the
OK
button.
PC Microphone
You can use the
Walkabout 5210
as a
PC microphone
to train a
speech-recognition system for your use or to make dictations
directly to a speech-recognition system.
To use the Walkabout 5210 as a PC microphone:
1. Using a cable fitted with two 3.5 mm mono jack plugs at
either end, connect the
Walkabout 5210
headphone socket
to the PC’s sound card.
Summary of Contents for Walkabout 5210
