20
Walkabout™ 5210 User Guide
Dictation Counter
Using the
Dictation counter
function, you can reset the dictation
counter. The dictation counter can count from
DICT001
to
DICT999
.
Tip:
You should not reset the counter too often so as to avoid
conflicts with dictations having the same name when they are
stored on the PC.
To reset the dictation counter:
1. Use the up/down button
to select the menu item
Dictation counter
.
2. Press the
OK
button. You see the message
Reset dictate
count?
in the display.
3. Press the
OK
button. The next new dictation then has the
lowest free number (for example, if there are currently
four dictations stored on the MultiMediaCard, the next
number is
DICT005
).
Version
Using the
Version
function, you can determine the version number
of the recorder’s software.
To determine the software version installed on your
Walkabout 5210 recorder:
1. Use the up/down button
to select the menu item
Version
.
2. Press the
OK
button. The display indicates:
SW-Version 1.1.0
or
1.1.2
– the recorder’s software
version
# 58144 009033
– an abbreviated serial number (the
complete number is on the type plate in the battery
compartment)
PCB# 00009541
– the number of the recorder’s printed
circuit board
3. Press the
ESC
button to remove this information from the
display.
Summary of Contents for Walkabout 5210
