Operation
4.1.2.1.2
4.1.2.1.2
Closing the safe door (with factory setting)
1.
Close the safe door.
2.
Turn the locking/release lever to clockwise as far it goes.
3.
Exit the product-specific software.
2
1
4.
Turn the key counter-clockwise as far as
possible (1).
5.
Remove the key from the lock (2).
1
6.
Close the cap of the lock (if installed).
NOTE
To change the number combination, you must turn the dial at least one full turn to the left
and then four full turns to the right.
Copyright © 2021, Diebold Nixdorf
01750340329 E
4-7
