Operation
4.1.2.2
4.1.2.2
Customizing the key and number combination locks
NOTE
After the system is installed, the key lock must be set to fit the three original keys and the
combination lock must be set to a new and/or your own number combination.
NOTE
The safe can be fitted either with one number combination lock and one key-operated lock
or, optionally, with two number combination locks. The second number combination lock is
changed the same way as described for the first one.
An electronic lock is also optionally available. In this case, please refer to the manufac-
turer's operating instructions included with the system.
3 Original keys:
These keys are used to open the safe door after
system installation.
4.1.2.2.1
4.1.2.2.1
Customizing the key-operated lock
NOTE
- Read this section carefully before customizing the lock.
- Customize the lock with the safe door open. To open the safe door, refer to the descrip-
tions in the respective sections ("Opening/closing the safe door (with factory setting)" or
"Opening/closing the safe door (with customized lock)"), depending on the installation sta-
tus.
- Never force the lock or key.
- Always keep your keys in a safe place.
- If you lose or misplace a key, always change the lock to fit a new key immediately, even
if the original key (the previous key) is recovered.
Copyright © 2021, Diebold Nixdorf
01750340329 E
4-9
