Operation
1
2
Figure 4-17:
Pushing in the Upper Unit
3.
Push the upper unit (1) into the system by
using the release lever (2) .
4.7.2
4.7.2
Pulling out / Pushing in the Lower Unit
1
2
1
2
Figure 4-18:
Pulling out the Lower Unit
ü
Note the different positions of the release
lever (1). Depending on the component, the
release lever can be located on the left or
right side of the component. The release
lever is marked green.
1.
Pull the release lever upwards (1).
2.
Pull the lower unit out of the system by using
the release lever (2).
Copyright © 2021, Diebold Nixdorf
01750340329 E
4-35
