Operation
4.5.2
4.5.2
Activating the head module in the event of a power failure (Rearload)
NOTE
Activating the electromechanical head module latching mechanism in the event of a
power failure
To activate the head module in the event of a power failure, you will need a 9 V block bat-
tery.
The 9V block battery is not contained in the delivery package and must be purchased sep-
arately from a specialist retailer.
Accessories required:
9V block battery
1.
Open the safe door (see
).
1
Figure 4-11:
9 V block battery with green marking
2.
Pay attention to the correct polarity of the
battery contacts when installing the 9 V block
battery.
3.
Select the battery contact cable with the
green marking (1).
Copyright © 2021, Diebold Nixdorf
01750340329 E
4-30
