Operation
4.2
4.2
Accessing the Upper Chassis
4.2.1
4.2.1
Opening the Fascia
Perform the following procedure to open the fascia and access the system modules in the upper chassis.
Refer to
1.
Insert the fascia key into the lock located on the right side near the top of the system fascia. Unlock
and open the fascia.
2.
Refer to
to place the system in the proper mode for maintenance.
3.
Refer to the appropriate section in this manual to access the desired component.
4.
Refer to the appropriate operating manual listed in
for information on completing the
maintenance procedures for your system's modules.
TD-01701-09
Figure 4-5:
Opening the Fascia
1
System
2
Fascia in open position
3
Key for the fascia lock (turn key clockwise)
Copyright © 2021, Diebold Nixdorf
01750337284 C
4-6
