Operation
4.1.6
4.1.6
Opening/Closing the lower transport unit
1.
Lift the door of the operating panel or the control panel or the customer panel up (see chapter "Ba-
sic Operation" in the operating manual).
2.
Pull out the head unit (see chapter "Basic Operation" in the operating manual for the device).
Opening
2
1
3.
Pull the release lever (1) on the bottom of
the head module.
4.
Push the lower banknote transport path up-
wards (2).
Closing
1
5.
Close the lower transport route until it snaps
in.
6.
Push the head module into the device.
7.
Swing the door of the operating panel or the customer panel down (see chapter "Basic Operation"
in the operating manual.
Copyright 2018 Diebold Nixdorf
01750308109 A
4-7