6
DIETZ / User manual rollator TAiMA M / Version 3.2.0 EN
03 BUILD UP THE ROLLATOR
SETTING UP THE ROLLATOR
The TAiMA rollator is fully assembled at
the factory. The following chapters describe
how to set up the rollator, adjust it to suit
your requirements and enable you to use it
comfortably.
SETTING UP/UNFOLDING THE
ROLLATOR
1.
Position the rollator in front of you with
the handles pointing towards you.
Push the side tubes of the seat apart and
down until the rollator has unfolded
completely
A
. The folding lock (red
button)
B
must audibly click into place.
WARNING
Safety hazard!
Only use the rollator if the
folding lock is correctly engaged.
WARNING
Risk of trapping!
Take care not to trap your
hands, fingers or clothing when operating the
folding lock and when unfolding/folding the
rollator!
ADJUSTING THE HANDLE HEIGHT
1.
Loosen screw B and remove it completely.
2.
Adjust the grip handles to the height
desired.
3.
Place screw B back in it´s hole and tighten
it firmly.
NOTE
To use TAiMA correctly, it must be adjusted to
your individual size. You should have an
employee of your medical supply store or
another trained person do this.
CLICK!
