ASSEMBLY
Place the individual parts of your rollator on the
floor. The handlebars are already connected to
the main frame by the brake cables. Place them
to the right and left of the main frame.
Unfolding the rollator
Hold the main frame by the seat's grip hole (1,
pic. 1) and position it on the floor with the front
wheels (swivel wheels). The grip hole must be
on the side facing away from you.
Bend over the main frame and grip the part of
the frame that faces away from you to unfold
the frame (2, pic. 1).
Now you can place the rollator with all four
wheels on the floor and fully unfold it by press
-
ing on the seating surface.
1
2
pic. 1
To lock the folding mechanism, fold down the
lever until it engages firmly in the guide (1,
pic. 2).
1
pic. 2
NOTE
To use FAKTO+ Arthritis correctly, it must be ad-
justed to your individual size. You should have
an employee of your medical supply store or
another trained person do this.
Fitting the armrests
Loosen the star screws of the two T-pipes. The
T-pipes can now be inserted into the vertical
tubes of the frame (1, pic. 3).
The clamping levers (3, pic. 3) at the upper end
of the T-pipes must point in the direction of the
front wheels.
Now insert the handlebars into the horizontal
element of the T-pipes from the front (2) so that
the side with the handle and the brakes points
upwards in the direction of travel and fix the
clamping lever (3, pic. 3).
Now apply the parking brake by pushing the
brake lever away from you. (See "Brake and
parking brake" chapter)
7
EN
FR
IT
NL
EN
02 PRODUCT DESCRIPTION
03 BUILD UP THE ROLLATOR
