16
DIETZ GmbH // User manual for TOMTAR G-2E // Version 1.0.2 EN
4.3 Folding the walking frame
To store the TOMTAR G-2E walking frame with-
out it taking up too much space, follow the in
-
structions below.
1.
Before the walking frame can be folded, it
must be set to the reciprocal function (see
also “Rigid or reciprocal function”).
2.
To release the side elements ready for folding,
press the folding lock firmly (1, Fig. 8).
3.
This will release the spring pin so that you can
fold the side elements inwards (2, Fig. 8).
4.
Take care not to get your fingers caught be-
tween the parts that are being folded.
5.
The walking frame cannot stand up on its
own when folded. Secure it to prevent it from
falling over and sustaining damage.
6.
To unfold the walking frame again, follow the
instructions under “Unfolding the walking
frame”.
WARNING
Risk of trapping!
Be careful of your hands
and fingers when folding the walking frame.
Fig. 8
2
1
2
4.4 Accessories and add-ons from third-party suppliers
In general, only original accessories from DIETZ
GmbH may be used. The TOMTAR walking frame
is not designed to have any accessories at
-
tached.
If third-party products are installed on the walk-
ing frame, responsibility for the safety of the
product passes to the person who installs the
accessories or add-ons. In this case, the installer
or fitter must issue a new declaration of confor-
mity for the combination of accessories and
product or add-on and product. The declaration
of conformity issued by DIETZ according to MDR
2017/745, Annex II is rendered null and void.
WARNING
Product safety!
The safety of the product
cannot be guaranteed if add-ons/accessories
are sourced from/installed by anyone other
than DIETZ.
WARNING
Product safety!
If accessories or add-ons are
fitted to the product, then the safety instruc-
tions in the user manual for the accessories or
add-ons must always be observed.
4 USING THE WALKING FRAME
