background image

 

E

www.digcorp.com

e-mail: dig@digcorp.com

26-304     REVA     102020 
Printed in the USA
DIG is a Registered Service Mark of DIG Corp.

1210 Activity Drive 
Vista, CA 92081-8510, USA

 WARRANTY

DIG CORPORATION warrants these products to be free from defects in material and workmanship 

for a period of three years from date of purchase. This warranty does not cover damage resulting 

from accident, indoor uses, misuse, neglect, modification, improper installation or subjection to 

line pressure more than 125 lbs. per square inch for anti-siphon valves, in-line valves and from an 

actuator. This warranty shall extend only to the original purchaser of the product for use by the 

purchaser. The obligation of DIG CORPORATION under this warranty is limited to repairing 
or replacing at its factory this product which shall be returned to the factory within three years 

after the original purchase and which on examination is found to contain defects in material 

and workmanship. DIG CORPORATION SHALL IN NO EVENT BE LIABLE FOR ANY INCIDENTAL 

OR CONSEQUENTIAL DAMAGES OF ANY KIND; THE SOLE OBLIGATION OF DIG BEING LIMITED 

TO REPAIR OR REPLACEMENT OF DEFECTIVE PRODUCTS. SOME STATES DO NOT ALLOW THE 

EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE 

LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. Unattended use for prolonged periods 

without inspection to verify proper operation is beyond the intended use of this product, and any 

damage resulting from such use shall not be the responsibility of DIG CORPORATION. There are no 

warranties, which extend beyond the description on the face hereof. In the case of purchase of the 

product for use other than, for irrigation purposes, DIG CORPORATION hereby disclaims any implied 

warranties including any warranties of merchantability and fitness for a particular purpose. In the 

case of the purchase of the product for personal, family or household purposes, DIG CORPORATION 

disclaims any such warranties to the extent permitted by law. To the extent that any such disclaimer 

or implied warranties shall be ineffectual, then any implied warranties shall be limited in duration to 

a period of three years from the date of the original purchase for use by the purchaser. Some states 

do not allow limitation on how long an implied warranty lasts, so the above limitation may not apply 

to you. In order to obtain performance under this warranty, the unit must be returned to the factory, 

along with proof of purchase indicating original date of purchase, shipping prepaid, addressed as 

follows: DIG CORPORATION, 1210 Activity Drive, Vista, CA 92081. Repaired or replaced units will be 

shipped prepaid to the name and address supplied with the unit returned under warranty. Allow four 

weeks for repairs and shipping time. Repair of damaged units not otherwise within warranty may be 

refused or done at a reasonable cost or charge at the option of DIG CORPORATION. This warranty 

gives you specific legal rights, and you may also have other rights, which vary from state to state.

Summary of Contents for 410BT Series

















Reviews: