DIG 410BT Series, Instruction Manual

3

    counter clockwise 1/2 to 3/4 of a turn, or until you hear or see water   

    flowing through the valve. To turn the water off, turn the solenoid  

    clockwise 1/2 to 3/4 of a turn and wait a few seconds for the          

    valve to close.
8. Program the 410BT series controller (see pages 4-12).

 6. IN-LINE VALVE INSTALLATION

Rated operating pressure: 10-125 PSI
Recommended Operating Pressure: 10-80 PSI
Warning: Wrap all fittings with Teflon tape! Do not use pipe cement on 

fittings or the valve as this will damage the valve and void the warranty!

1. Shut off main water supply.
2. Install a 3/4

″

 ball or gate valve onto the PVC pipe or to the valve  

    manifold before installing the controller (Figure 6a and 6b).

CHART A

Model

Compatible Valves

 30-920

BERMAD series 200, HIT series 500,DOROT series 80, 

GRISWOLD series2000, DW and BUCKNER series VB valves

 30-921 

INCLUDED

RAIN BIRD DV, DVF, PGA, PEB (1

″

 only), GB, EFB-CP,  

BPE, PESB (1

″

 only) and ASVF valves

 30-922 

INCLUDED

HUNTER series ASV, HPV, ICV,PGV, SRV, IBV and  

ASVF valves

 30-923

WEATHERMATIC series 12000, 21000, 8200CR valves

 30-924 

INCLUDED

IRRITROL series 100, 200B, 205, 217B,

700, 2400, 2500, 2600 and TORO series 220, P220 valves

 30-925

SUPERIOR series 950, HUNTER HBV and TORO series 

252 valves (1.5

″

 and larger)