Define places to
install the parts
•start with the dguard
®
module
•hide the GPS
antenna (place it
black side up)
•if required, dismount
the fairing and/or fuel
tank.
Cable harness
• place
harness
next to original
harness
•attach the
dguard
®
button
to the handlebar
(or on upper
clamp)
•connect cable
harness to
module
Powersupply
(+ & - )
•if possible,
connect both
wires directly to
the battery; if not,
use steady
current and
ground (frame)
Live terminal for
ignition
•connect the
ignition positive
wire at
„terminal
15“ – by the
circuit diagram.
Sometimes the
rear light is an
easy solution.
Connect the
cable harness to
the remaining
parts
(Plug and Play)
Calibrate the
dguard via the
digades portal
installation dguard
®
Process of parts installation dguard
®
:
