•
generally all parts should stay away from heat sources like
the exhaust and the radiator
•
place the dguard
®
button on the handlebar, the upper
clamp or dashboard
•
place the SOS button within the field of vision of the rider
•
place the dguard
®
harness next to the original
•
make sure that the harness is not kinked
•
double-check that all connectors are plugged in
properly!
The cable harness must be connected to the dguard
®
module, the dguard
®
sensor, the dguard
®
button, the
vehicle battery (“terminal 30”) and the live positive terminal
of the power circuit activated by the ignition (“terminal
15”).
installation dguard
®
advice - dguard
®
cable harness & dguard
®
button:
