12
PM-000084-D - Slasher Operators Manual - OCTOBER 2017
6 INSTALLATION AND OPERATING INSTRUCTIONS
SAFETY FIRST! READ AND UNDERSTAND THE SAFETY INSTRUCTIONS BEFORE BEGINNING ANY
SLASHING OPERATING.
FAILURE TO OBEY THE FOLLOWING PROCEDURE COULD RESULT IN DEATH OR SERIOUS INJURY.
DANGER! ROTATING BLADE HAZARD, STAY BACK LOOSE OBJECT CAN BE DISCHARGED!
NEVER LIFT THIS PRODUCT:
• More than 500mm off the ground whilst blades are spinning OR to a height where visibility is obstructed, which ever is lower.
• DO NOT raise the Slasher in a vertical position whilst the blades are spinning.
• The Slasher is not designed to be used as a hedge trimming tool.
SLASHER OPERATION
GENERAL INFORMATION
The Digga Slasher is perfect for cutting tall grass and brush. The Slasher attaches to the toolbar/quick attach mechanism for your loader or quick
hitch of your excavator (depending upon which version you ordered). Due to this arrangement, thorough knowledge of the loader or excavator
control is necessary for machine operation. Read and understand your loader or excavator’s operator’s manual before attempting to use
the Slasher.
OPERATING TIPS
• Increase the life of your bidirectional blades by cutting brush in one direction and cutting grass and smaller vegetation in another
(This will keep the blades sharp for cutting grass).
• If your preferred direction of blade rotation is not set up correctly for your loader “default”, the hoses may be reversed at the loader end.
