background image

For Product and Ordering Information, Contact:

Toll-Free: 1-800-323-4340 

Phone: 1-847-549-7600 

Fax: 1-847-247-2929 

ColeParmer.com/Digi-Sense

Toll-Free: 1-800-358-5525 

Phone: 1-847-327-2000 

Fax: 1-847-327-2700 

Davis.com/Digi-Sense

1065DGMAN_20250-01 Rev.1

Manual Part No. 00100-32

Phone:

 1-866-INNOCAL (1-866-466-6225)   

Fax:

 1-847-327-2993 

E-mail:

 sales@innocalsolutions.com 

Web:

 InnoCalSolutions.com

Maintenance, Recalibration, and  

Repair 

(continued)

Battery Replacement

When the battery power falls low, the 

low-battery

 icon 

will appear on the screen. Replace the three AAA batteries 

by removing the screw holding the rear battery com-

partment cover to access the battery compartment. 

Ensure that the compartment cover is securely fastened 

when finished. 

Note:

 If you do not intend to use the 

meter for a long time, remove the batteries.

It is recommended that Digi-Sense products are cali-

brated annually

 to ensure proper function and accurate 

measurements; however, your quality system or regula-

tory body may require more frequent calibrations. To 

schedule your recalibration, please contact InnoCal, an 

ISO 17025 calibration laboratory accredited by A2LA.

Summary of Contents for 20250-01













Reviews: