9
Sample Rate of Data Recording
1. Press and hold
SET
button for
three seconds to enter the
Setup mode. While in Setup
mode, the display shows the
SETUP
icon.
2. Use the
/T1–T2
and
Hold/
buttons to scroll to the
rate
set-
ting option screen (see Fig. 2).
3. Press
Rec/Enter
button to
access the “00:01” (minute,
second) value shown in the
tertiary display (see Fig. 2).
Fig. 2
Fig. 2
4. Press
/Max/Min
button until the
minute
value is
flashing. Use the
/T1–T2
and
Hold/
buttons to
set the desired value.
5. Press
/Max/Min
button again until the
second
value is flashing. Use the
/T1–T2
and
Hold/
buttons to set the desired value.
6. Press
Rec/Enter
button to store the new setting in
memory.
7.
Note:
When the meter is powered down, the default
sample rate is the last setting.
