12
Mode / Menu Level 4
Hi (alarm)
This function allows the user to program the set point of when the out-of-range
high temperature alarm will trigger. An alarm will sound, and the display will
flash when the set point is reached.
1. Pull the trigger to take a measurement.
2. Release the trigger to stop taking the measurement.
3. Press the
MODE button
until
Hi
appears.
4. Press the
F2 (On/Off) softkey
to turn the alarm on or off.
5. To adjust the alarm set point, press the
F1
(
)
softkey
to toggle down and
F3
(
)
softkey
to toggle up to desired temperature.
Lo (alarm)
This function allows the user to program the set point of when the out-of-range
low temperature alarm will trigger. An alarm will sound, and the display will flash
when the set point is reached.
1. Pull the trigger to take a measurement.
2. Release the trigger to stop taking the measurement.
3. Press the
MODE button
until
Lo
appears.
4. Press the
F2 (On/Off) softkey
to turn the alarm on or off.
5. To adjust the alarm set point, press the
F1
(
)
softkey
to toggle down and
F3
(
)
softkey
to toggle up to desired temperature.
Set (sub menu)
SET
Time
Set time
Date
Set date
Backlight
Adjust backlight brightness
Buzzer
Button
Enable or disable button sound
Alarm
Enable or disable alarm sound
Bluetooth
Enable or disable Bluetooth sound
Contrast
Adjust display contrast
APO time
Adjust auto power-off time
Data log
Switch
Enable or disable the data log
Sample rate
Set the data log sample rate
Delete
Delete all data log
Bluetooth
ON/OFF
Enable or disable Bluetooth
