3
• Test leads and prods
must be in good order, clean, and
with no broken or cracked insulation.
• UK Safety Authorities recommend the use of fused test
leads when measuring voltage on high energy systems.
• Replacement fuses
must be of the correct type and rating.
• The instrument
must not be used if any part of it is damaged.
• Warnings and precautions must be
read and understood
before an instrument is used. They must be observed dur-
ing the operation of this instrument.
Safety used on this instrument are:
Caution: refer to accompanying notes.
This symbol indicates that the operator must refer
to an explanation in the manual to avoid personal
injury or damage to the meter.
Caution: risk of electric shock
This WARNING symbol indicates a potentially
hazardous situation, which if not avoided, could
result in death or serious injury.
This CAUTION symbol indicates a potentially
hazardous situation, which if not avoided, may
result damage to the product.
This symbol advises the user that the terminal(s)
so marked must not be connected to a circuit point
at which the voltage with respect to earth ground
exceeds (in this case) 1000 VAC or VDC.
Equipment protected throughout by Double
Insulation (Class II)
Equipment complies with current EU directives.
MAX
500V
1065DGMAN_20250-53-54 Manual.indd 3
8/16/2017 10:42:05 AM
