6
Setup and Operation
To turn on the instrument turn the rotary function switch
from the OFF position to any measurement range.
NOTE:
For best battery life ALWAYS turn the rotary function
switch to the OFF position when the meter is not in use.
Meter has Auto power-off that automatically shuts the
meter off if 30 minutes elapse between uses.
NOTE:
On some low AC and DC voltage ranges, with the
test leads not connected to a device, the display may show
a random, changing reading. This is normal and is caused
by the high-input sensitivity. The reading will stabilize and
give a proper measurement when connected to a circuit.
MODE Button
To select AC or DC measurement when Voltages, Amps,
mA , µA,
Ω
,
, •))), CAP, or Hz% are selected.
HOLD Button
The Data HOLD function allows the meter to "freeze" a
measurement for later reference.
1. Press the HOLD button to “freeze” the reading on the
display. The indicator “HOLD” will be appear in the
display.
2. Press the HOLD button to resume normal operation.
1065DGMAN_20250-53-54 Manual.indd 6
8/16/2017 10:42:05 AM
