7
RANGE Button
When the meter is first turned on, it automatically defaults
to Autoranging. This automatically selects the best range
for the measurements being made and is generally the
optimal mode for most measurements. For measurement
situations requiring that a range be manually selected,
perform the following:
1. Press the RANGE button. The “Auto Range” display
indicator will turn off. The “Manual Range” display
indicator will turn on
2. Press the RANGE button to step through the available
ranges until you select the range you want.
3. Press and hold the RANGE button for 2 seconds to exit
the manual ranging mode and return to autoranging.
REL Button (Model 20250-53 only)
The relative (REL) measurement feature allows you to
make measurements relative to a stored reference value.
A reference voltage, current, etc., can be stored and
measurements made in comparison to that value. The
displayed value is the difference between the reference
value and the measured value.
Note:
This function works with all functions except Hz%,
Diode, and Continuity.
1. Press the REL button to store the reading in the display
and the "REL" indicator will appear on the display.
2. The display will now indicate the difference between the
stored value and the measured value.
3. Press the REL button again to resume normal operation.
1065DGMAN_20250-53-54 Manual.indd 7
8/16/2017 10:42:05 AM
