9
AC/DC Voltage Measurements
1. Set the range switch to ACV or DCV position.
2. Connect red test lead to V
Ω
terminal and black test
lead to terminal COM.
3. Connect test leads IN PARALLEL to the circuit being
measured.
4. Read the voltage value on LCD.
Battery Saver (Sleep Mode)
The meter will automatically enter the sleep mode if there
is no function change or button press for 10 minutes, but
exits sleep mode as soon as you turn the rotary function
switch or push down any button.
Power Tools and Small Appliances
This test would also apply to other similar equipment that
have a line cord. For double insulated power tools, the
megohmmeter lead shown connected to the housing
would be connected to some metal part of the tool (e.g.
chuck, blade).
Note: The switch of the device under test must be in the
ON position and the main power should be disconnected.
1065DGMAN_20250-60 DS Insulation tester manual.indd 9
8/7/2017 2:09:49 PM
