15
Dual Probe Measurements
The thermometer will automatically determine if one
or two thermocouples are connected. When two
thermocouples are connected, the upper main dis-
play will initially show T1 and the lower right dis-
play will show T2. Pressing the T1/T2 key once will
cause the upper display to show T2 and the lower
left display to show T1. Pressing the
T1/T2 key again will cause the upper display to
show T1-T2, the lower left display to show T1, and
the lower right display to show T2.
MAXIMUM READINGS
The maximum reading function displays the maxi-
mum reading since power up or since the last time
the clear function was used. The maximum read-
ing function is ideal for monitoring unattended op-
erations while continually displaying every tempera-
ture change that occurs. The maximum and mini-
mum values are sensed and automatically stored
until you are ready to observe the reading.
Do not turn the instrument OFF when a maximum
or minimum temperature value may be needed;
MAX/MIN memory contents will be lost. Factory
Calibration will be maintained.
