21
1. Momentarily press the STORE key. Both T1 and
T2 are stored. The upper main display will mo-
mentarily show the storage location number and
the STO annunciator will be on.
After three seconds the storage number will be re-
placed with the temperature reading but the STO
annunciator remains on to indicate a temperature
reading has been stored. The STORE key may be
pressed as fast as once per second.
2. Repeat step 1 for all the points to be recorded
up to a maximum of 25. Each time the STORE
key is pressed the new reading will be stored
and the upper main display will show the stor-
age location number for about 3 seconds. After
25 stored readings, the next time the STORE
key is pressed the main display will indicate
FULL.
RECALL READINGS
This function allows the stored readings to be re-
called. RECALL shows each stored reading indi-
vidually. To recall readings proceed as follows:
1. Momentarily press the RECALL key, the first
stored reading will be displayed on the lower dis-
play and the store number “1” will be displayed
on the upper display. The STO, and RCL an-
nunciators will be on.
2. To step through the readings, press the
MIN
▼
▼
▼
▼
▼
key or the MAX
▲
▲
▲
▲
▲
key. Each press of
the key will advance to the next reading in se-
quence.
3. To return to normal operation press any other
key except ON/OFF, MAX
▲
▲
▲
▲
▲
, MIN
▼
▼
▼
▼
▼
or RE-
CALL.
Clearing Stored Readings
Press the CLEAR key, then the STORE key. The
stored readings in memory will be cleared.
