background image

Operators Manual 

 

D3740 37 

 
Following “LSTORE” modes automatically configures print format for 
animal weighing with EID data.  

 MAN 

WT

 - Manual Weight  

 AUTOWT

 - Automatic Weight  

MANEID

 - Manual EID See EID Print Format and CSV Data Format  

 AUTEID

 - Automatic  

 EID 

MANCHK

 - Manual Check  

 AUTCHK

 - Automatic Check  

 

EID Print Format  

EID print data transmitted out COMPUTER port on bottom of indicator 
while weighing animals.  

Note:

  When using computer port for EID data, make sure SCOREM set to 

“0”, TAREAP set to “OFF” and APRINT set to “OFF”.  

EID data varies in number of characters, spaces etc. Refer to Allflex TM 
Stick Reader user manual for more information.  

C>XXXXX>X>XXX>XXXXXXXXXXXX, 

XXXXXX,LB,$,GR,mm/dd/yy,hh:mm,Z<cr><lf>  

Examples of EID print format:  

A 00000 0 982 000017383201,<cr><lf>  
890,LB,$,GR,8/27/03,10:15,_<cr><lf>  

 

A 00000 0 982 000017383201,<cr><lf>  

1001,LB, ,GR,8/27/03,10:21,M<cr><lf>  

 

EID print data format always uses date format #2 and 24-hour time format 
as shown.  
 

EID CSV Data Format  

EID CSV data collected from ear tag using EID Stick Reader and stored in 
memory along with weight, date, time, other information. Eight data fields 
each separated by comma followed by carriage return and line feed:  
 
Field 1   

EID Data 

Field 2   

Weight Value 

Field 3   

Unit of Measure (Lb/Kg) 

Field 4   

“$” Indicates Weight Locked-On 

Field 5   

 

Field 6   

Date 

Field 7   

Time 

Field 8   

Checksum Character 

Carriage Return 

Summary of Contents for SW4600EID















































Reviews: