- 6 -
Setup
Remove the protective film from the display. Open the battery
compartment on the back side of the clock and insert two AAA
batteries in the correct polarity. Close the battery compartment. After
inserting the batteries the radio control reception process is
automatically started. During the reception process the symbol
will blink on the display. The reception process may take several
minutes to complete. After succesfull reception of the radio control
signal, time and date will be set automatically.
The reception process can be restarted or stopped by pressing
/
. During the reception process all button except
/
have no
function.
The clock synchronises the internal time every day at 01:00. If the
reception attempt is not successfull it will be repeated every full hour
between 02:00 and 07:00.
Summer time display
If the reception quality is sufficient the clock will set itself to summer
time automatically and the symbol
will appear on the display.
