Configure the device using the ConnectPort LTS web interface
Configuration through the web interface
Digi ConnectPort LTS User Guide
57
n
UDP Sockets
: Allows the automatic distribution of serial data from one host to many devices at
the same time. The UDP Sockets profile allows serial devices to communicate using UDP. The
UDP Server configuration allows the serial port to receive data from one or more systems or
devices on the network. See
Assign a profile to a serial port
for more information.
The UDP Client configuration allows the automatic distribution of serial data from one host to
many devices at the same time using UDP sockets.
The port numbering conventions shown in the TCP Sockets Profile also apply to UDP sockets.
Not all port profiles are supported in all products. Supported port profiles varies by ConnectPort LTS
model. If a profile listed in this description is not available on the page, it is not supported in the
ConnectPort LTS product.
If you selected a port profile, the port number associated with the port profile appears at the top of
the page. You can change or retain the profile and adjust individual settings.
Everything displayed on the Serial Ports Configuration page between
Port Profile Settings
and the
links to the
Basic Serial Settings
and
Advanced Serial Settings
depends on the selected port profile.
Assign a profile to a serial port
To assign a profile to a serial port:
1. Select
Configuration
>
Serial Ports
.
2. Click a
port number
from the
Port
column.
3. Click
Change Profile
.
4. On the
Select Port Profile
page, select a port profile option and then click
Apply
.
