Configure the AnywhereUSB Plus Hub from the CLI
set usbclient
AnywhereUSB® Plus User Guide
149
set usbclient
Purpose
Add a client ID to the client list. When a computer searches for Hubs, any computer with a client ID on
the client list can connect to the Hub. You can also add client IDs in the web UI. See
Automatically register or reject computers that have not previously connected to the Hub. See
Automatically register unknown clients
for more information.
Syntax
set usbclient [
option]
Options
Use these options to add a client ID to the client list.
index=[
1-24
]
Specify the client index.
id=[
string
]
Specify the client ID for the computer.
description=[
string
]
Specify a descriptive name for the computer.
groups=[
list
]
Specify the groups this client ID can access.
Use these options to register or reject unknown clients.
autoreg=[on|off]
Determine whether unknown clients should be registered.
autoreg_groups=[
list
]
List the group numbers to which an unknown client is allowed access.
Examples
The client ID can access one group
set usbclient index=1 group=1
The client ID can access multiple groups
The AnywhereUSB Manager can connect to one or all of these groups at one time.
set usbclient index=3 groups=1,6-8
