Administrators: Configure the AnywhereUSB® Plus in the web user
interface
Rename a Hub and the groups in a
Hub
AnywhereUSB® Plus User Guide
61
Note
Digi recommends keeping the
Automatically Register Unknown Clients
option disabled and to
on a secure network.
1.
2. Click
AnywhereUSB
from the
Configuration
section. The
AnywhereUSB Configuration
page
appears.
3. De-select the
Automatically Register Unknown Clients
option so the Hub rejects any client
ID that is not on the Hub's registered client list. In this case, a red X displays next to the name
of the Hubs in the
AnywhereUSB Manager
to which the client ID cannot connect.
4. Click
Apply
to save the changes.
Automatically register unknown clients
Select the
Automatically Register Unknown Clients
option to automatically add the client ID for an
unknown computer to the
for the Hub. When you open the
AnywhereUSB Manager
and the
Hub is found on the network, and the user is able to automatically connect to the Hub.
By default, the computer will have access to the ports in the groups specified in the
Group Access
field in the
Settings for Unknown Clients
section. The ports for each group are specified in the
section. You can change the groups to which a computer has access in the
section.
A user will be able to connect to the Hub in the
AnywhereUSB Manager
.
1.
2. Click
AnywhereUSB
from the
Configuration
section. The
AnywhereUSB Configuration
page
appears.
3. Select the option to automatically add the client ID for an unknown computer to the client list
for the Hub.
4. Click the check box next to the group(s) to which the computer is allowed access. As you select
groups, the selected group numbers appear in the
Group Access
field in the
Settings for
Unknown Clients
section.
You can also manually enter group numbers in the
Group Access
field.
5. Click
Apply
to save the changes.
Rename a Hub and the groups in a Hub
A default name is assigned to a Hub and to the groups in the Hub. These names are associated with
the physical Hub and groups on the Hub, and can be changed in the
Configuration and Management
web user interface.
Note
A USB device does not have a name that can be changed. However, a local name can be
assigned to a USB device in the
AnywhereUSB Manager
. See
Assign a local name to a USB device
The default Hub name and group name can be see by every user that connects to the Hub. You can
also give a Hub and groups a local name that can be see only by the user that assigns the name. See
and
