1
Verify the hardware
Assemble the device
If any item is missing or damaged, please contact your supplier. Note any damage that may have occurred during shipping and report it to the supplier.
2
Quick Start Guide
Digi Connect Tank v2
Battery
Magnet
1-inch to 2-inch
NPT adapter
Digi Connect Tank v2
with four retaining screws
Optional parts available through Digi:
a
b
c
d
a
c
d
Use a 9/64-inch or 3.5 mm hex key to loosen the four retaining
screws and open the Connect Tank enclosure cover.
Insert the SIM.
Note:
Get an activated SIM card (standard size) from your
cellular service provider.
Connect the battery. Make sure the battery and its wiring
are properly placed.
(Optional) Attach a 1-inch to 2-inch adapter to the bottom
of the device if your tank has a 2-inch NPT threaded opening.
Before you close the device, complete initial configuration
using the command line interface (CLI); see step 3.
e
90001471 B
b
Unlock the SIM card tray by gently pushing the metal
bar toward the bottom of the tray and pulling it open.
Insert the SIM card with the metal contacts face down
and the flat edge inserted into the holder.
Press the SIM card tray onto the board and close it by
gently pushing the metal bar toward the top of the
SIM card holder.
1
2
3
