Command descriptions
set tcpserial
ConnectPort® LTS Command Reference
138
set tcpserial
Purpose
Configures behaviors of TCP serial connections and displays current TCP serial settings. This
command affects the following TCP serial connections:
n
Connections made using the autoconnect feature.
n
Incoming network connections made to the following:
l
The TCP server (raw socket, IP port 2101~2132 by default)
l
The Telnet server (telnet socket, IP port 2001~2032 by default)
l
The SSH server (telnet socket, IP port 2501~2532 by default)
l
Secure Sockets Layer (ssl socket, IP port 2601~2632 by default)
n
Default IP port number can be changed using “set service” command
Required permissions
For products with two or more users, to use this command, permissions must be set to one of the
following:
n
For a user to display the TCP serial settings for the line on which they are logged in: “set
permissions s-tcpserial=r-self”
n
For a user to display the TCP serial settings for any line:
n
“set permissions s-tcpserial=read”
n
For a user to display and set the TCP serial settings for the line on which they are logged in:
“set permissions s-tcpserial=rw-self”
n
For a user to display the TCP serial settings for any line, and set TCP serial settings for the line
on which the user is logged in:
n
“set permissions s-tcpserial=w-self-r”
n
For a user to display and set the TCP serial settings on any line:
n
“set permissions s-tcpserial=rw”
See "set permissions" for details on setting user permissions for commands.
Syntax
Set behaviors of TCP serial connections
set tcpserial port=
range
[hangupdcd={on|off}]
[hangupdsr={on|off}]
[idletime={0|n}]
[sid={on|off}]
[sidstring=
socketid string]
[buffered={on|off}]
