Command descriptions
display
ConnectPort® LTS Command Reference
25
Displays DNS server information.
memory
Displays memory usage.
netdevice
Displays the active interfaces on the system, for example, PPP and Ethernet interfaces, and their
status, such as “Closed” or “Connected.”
proxyarp
Displays Proxy ARP table entries.
serial
Displays serial modem signals (DTR, RTS, CTS, DSR, DCD).
sockets
Displays information about how socket resources are being used by the system.
tcp
Displays active TCP sessions and active TCP listeners. To display more TCP-related statistics, such as
number of input and output bytes transmitted, issue an “info tcp” command (see "info").
udp
Displays current UDP listeners. To display more UDP-related statistics, such as number of input and
output bytes transmitted, issue an “info udp” command (see "info").
uptime
Displays amount of time since the device was booted.
versions
Displays boot firmware version information.
xbee {refresh|clear}
Displays or refreshes device information of XBee module on the network. For products with two or
more users, permissions must be set to “set permissions s-xbee = read” to user this command. See
"set permissions" for details on setting user permissions for commands.
refresh
Refresh the information of XBee devices on the network
clear
Remove current network information of XBee devices and refresh the information of
XBee devices on the network again.
Example
Display device information
#> display device
device information:
product
: ConnectPort LTS 32 MEI W
mac address #1
: 00:40:9D:CC:CC:C6
mac address #2
: 00:40:9D:56:47:39
firmware version
: N/A
bios version
: N/Acpu utilization
: 1 %
uptime
: 2 hours 51 seconds