Display
4
Number of laps
Field 1
“
LOG
”
Field 2
Total number of ascent and descent
Field 3
“
LAP
”
Note
- A lap is a vertical movement including ascent and then descent
equal or more than 50m (150 ft).
Display
5
Time duration of recording
information
Field 1
“
LOG
”
Field 2
Total time of log
Field 3
“
dUr
”
Note
- The memory capacity is 99 logs, maximum 20 hours duration
each. After log number 99 is being used, the logbook will start
from 1 again.
-
“LOG” will begin to flash when user leaves this mode while it is
functioning.
- The watch will return to Time Main Mode after 10 minutes
- Logbook will not function when Barometer Use is selected.
Clearing logbook
- Press [S2] ×4 from Altimeter Main Mode --> Hold [S2] for 1
second, “CLR” and “LOG” will display on Field 1 and “LOG-XX”
will display on Field 2. “NO” will flash on Field 3
- Press [S2] to select the current logbook or entire logbook
-
Press [S3] or [S4] to select “YES” or “NO”
- Press [S1] to accept the setting
Logbook History
- The logbook history shows a summation of all logs recorded,
such as total vertical distance, highest altitude, the best ascent and
decent rate, date.
Setup
- Press [S2] ×5 from the Altimeter Main Mode
There are totally four displays, they are:
Display
1
Current logbook history
Field 1
Year of the last cleared logbook
history and “
LOG
”
Field 2
“
HIS
”
Field 3
Month and Day of the last
cleared logbook
Press [S3] or [S4] to scroll the records
Display 2
The highest record
Field 1
Flashing “
HI
” and “
LOG
”
Field 2
Highest altitude recorded
since the last date cleared
Field 3
Year and date interchange
for 4 secs.
Display
3
Accumulative ascent Record
Field 1
Flashing “
ASC
” and “
LOG
”
Field 2
Total accumulative vertical
ascent since the last reset.
Field 3
Blank
Display
4
Accumulative descent Record
Field 1
Flashing “
dSC
” and “
LOG
”
Field 2
Total accumulative vertical
descent since the last reset
Field 3
Blank
- Press [S1] or [S2] to exit this activity and back to Altimeter Main
Mode.
Note
- The watch will return to main mode after 10 minutes
- Logbook history records remain unchanged when Barometer Use
is selected
Clearing the logbook history
-
Hold [S2] for 1 second, “CLR” and “LOG” will display on Field 1 --
> “HIS” will display on Field 2 --> “NO” will begin to flash on
Field 3.
-
Press [S3] or [S4] select “YES “ or “NO”
- Press [S1] button to accept the setting
Important remarks
- Measurement on the rate of vertical movement and vertical
altitude in 1-second intervals for first 2 seconds. A flashing zero will
be shown in the first 2 seconds.
- Weighted Current Rate is used to determine the frequency of
measurement of altimeter after the first two seconds. Computer in
the watch uses the most recent 3 current rates, which are the
ascent rate or descent rate taken by the altimeter sensor, to
calculate the measurement frequency. 1 measurement per 1, 2, 5
or 10 secs is used depending on the results of the computer.
BAROMETER MAIN MODE:
Path
Press
until
the
mode indicator is directly
below “BARO”
Field 1
Current temperature,
barometer, trend indicator.
Field 2
Sea level pressure
Field 3
Current time or current
absolute atmospheric
pressure
Outer
circumference
Pressure animation. One
complete circle shows the
atmospheric pressure over
100 mbar or 1 inHg
- Press [S4] to select current time or current absolute atmosphere
pressure on field 3
Note
- The absolute atmospheric pressure is the actual pressure in any
location at any given time.
- When Altimeter Use is selected, only the current atmosphere
pressure reading will change.
BAROMETER TREND INDICATOR:
- Barometric trend is comprised of two lines forming an arrow. The
left line represents the trend from
–6 to -3 hours and the right
arrow represents the trend from
–3 to the present time. They
can indicate 9 different patterns in the barometric trend.
Situation last 3 hours
Drop heavily
Remaining
stable
Rise heavily
S
it
u
a
tion
3
–6
h
o
u
rs
ago.
Drop
heavily
Remaining
stable
Rise
heavily
Notes
- Rise or drop heavily means raise or drop more than 2 mbar within
3 hours.
- When the Altimeter Use is selected, the trend indicator is not
shown, except the 4-day memory mode.
