ALTIMETER
– BAROMETER USE SELECTION:
- Select the Altimeter Use or Barometer Use.
- Adjust the sea level pressure.
Path
Press
1 from the
Barometer Main Mode.
Field 1
“
SEA
”
Field 2
Sea level pressure
Field 3
“
USE
”
Outer
Circumference
Pressure animation. One
complete circle shows the
atmospheric pressure over
100 mbar or 1 inHg
Setup
- Altimeter
– Barometer Use Selection
-
Press [S3] or [S4] to switch the direction of arrow (“Altimeter Use”
or “Barometer Use”)
- Press [S1] to accept the setting
- Sea Level Pressure adjust
- Hold [S2] for 1 second --> Sea level pressure on field 2 will begin
to flash --> Press [S3] or to set the sea [S4] level pressure. -->
Press [S1] to accept the setting
Notes
- Information on the current sea level pressure can be obtained
through newspaper, local news and radio weather reports, local
airport or the Internet.
PRESSURE DIFFERENCE MEASUREMENT:
- It measures the absolute difference in barometric pressure within
a start and stop time.
Path
Press
2 from
the Barometer Main Mode
Field 1
Change in temperature,
barometer trend indicator,
“
DIFF
”
Field 2
Change in sea level
pressure
Field 3
Duration time
Outer
Circumference
Pressure animation. One
complete circle shows the
atmospheric
pressure over 100 mbar or
1 inHg
Setup
-
Hold (S2) for 1 second, “
SET
” will display on Field 1 and a zero
value will begin to flash on Field 2
- Press (S3) or (S4) to select a non-flashing pressure difference
(the previous pressure difference record) to resume the previous
difference measurement or select the flashing zero to start a new
difference measurement. For a new difference measurement the
time will start running automatically.
- Press (S1) to accept the setting
- Press (S4) to stop or resume the measurement
Note
-
Every time this mode is entered, the reading will start with
flashing zero.
-
“
DIFF
” will begin to flash when user leave the mode while it is
functioning
- When Altimeter Use is selected, all information will not change in
this mode.
- The watch will return to Time Main Mode after 12 hours.
4 DAY MEMORY MODE:
- The changes in pressure in the last 4-days help the user to
forecast the weather condition.
Path
Press
3 from the
Barometer Main Mode
Field 1
Day of week, barometric trend
indicator and “
MEM
”
Field 2
Change in sea level pressure
Field 3
Particular flashing hour
Outer
Circumference
Pressure animation. One
complete circle shows the
atmospheric pressure over
100 mbar or 1 inHg
- Press (S3) or (S4) to view records
Note
- The latest 6 records are taken in 1-hour intervals. Other records
are taken in 6-hour intervals
- Barometer trend indicator only appears in this mode when
Altimeter Use is selected.
- The watch will return to main mode after 10 minute.
Calibration of Absolute Pressure
- User can calibrate the absolute atmosphere pressure.
Adjust
- In the Barometer Main Mode, hold (S2) for 1 second, the
absolute atmosphere pressure value will begin to flash on field 2
- Press (S3) or (S4) to set,
- Press (S1) to accept the setting
Important notes
- The absolute pressure is calibrated by factory, it is not
recommended for the user to set the value in daily use.
- When there is a physical characteristic shift of sensor due to
aging, or when the watch has been left unused for more than one
year, calibrating the absolute pressure is recommended.
- To find out an accurate pressure value, use a professional
barometer to calibrate the absolute pressure.
- User can also adjust the watch at seaside after getting an
accurate sea level value from local weather observatory.
Remarks
- Pressure and temperature changes are measured in intervals of
10 seconds.
- Barometric values are measured at 1-hour intervals to estimate
the barometric trend.
- Temperature range: -10 °
C
to 60 °
C
(14 °
F
to 140 °
F
). “
LL
” will
be displayed when the temperature is lower than -10°
C
and “
HH
”
will be displayed when the temperature is higher than 60 °
C
.
