Fig. 33
AC power supply:
Plug the power jack of the adaptor into the DC 9V terminal at the right side of the Lane
Timer to use AC power. Please note that the power supply from the AA size alkaline
batteries will be cut automatically as soon as the power jack is plugged into the terminal.
Use only the provided adaptor otherwise damage to the Lane timer may be caused.
MultiLane upload program:
A) Program installation
B) AU9720 driver setup, Hardware connection and settings
C) Program Functions
D) Program uninstallation
A) Program installation
1) Insert the CD disk labelled MultilLane program to the CD Rom Drive.
2) Go to ‘ MY COMPUTER ’, double click the CD Rom drive.
3) Two drivers can be found. The AU9720 driver setup is for driving the IC, while the
MultiLane is used for downloading data from the Lane Timer to the computer.
4) Double click the SETUP icon in the MultiLane folder, click ‘ SETUP ’ to start
installation.
10
5) The program will install MultiLane in C:\digisportinstruments-multilane, click ‘ OK ’
to accept. When the installation completes, click ‘ Restart ’ button to reboot the
computer and let the changes to take effect. A shortcut icon ‘ MultiLane ’ will be
created on the computer desktop.
